3 3/4'' (95.2 mm)

3 3/4 inch (95.2 mm) drill-center pulls for medium drawer fronts

3 3/4 inch (95.2 mm) drill-center pulls land in the medium-pull range used heavily across both traditional and transitional kitchens. The 95.2 mm spec sits just below the European 96 mm standard, close enough that many manufacturers cross-list the two. Drawer fronts of roughly 14 to 22 inches wide carry this size comfortably, and the spacing turns up on a lot of stock cabinet brands from the late 1990s onward.

Where this size pulls its weight

Standard base cabinets, vanity drawers, and the wide drawer rows under cooktops are common landing spots. The proportion is large enough to grip securely but small enough not to dominate the door visually. On shaker fronts and slab fronts alike, 3 3/4 inch reads neutral and balanced. It's also the size most often chosen when a buyer wants the look of a cup pull on a kitchen drawer rather than the smaller 2 1/2 inch traditional cup-pull spec.

Style range at this center

Almost every pull category produces a 3 3/4 inch option. Bar pulls, cup pulls, bin pulls, decorative pulls with backplates, and traditional birdcage and arch pulls all show up at this spacing. If you're working across mixed door styles in one kitchen, this size gives you the broadest catalog to pull from. The cross-listing with 96 mm means many European designs are also available, which expands the modern-bar-pull selection considerably.

Adjacent sizes worth checking

If existing holes turn out slightly closer together, see 3 1/2 inch (88.9 mm), which is the equivalent older American standard. Moving the other direction, 4 inch (101.6 mm) is the next step up and shows on slightly wider drawer fronts. For runs that want a warmer note, the size is well represented in aged bronze.